Core services

Engineered protection.

Five ways we protect and restore the surfaces around your home or business — each one prepared, applied and finished to the same standard.

Most requested

Concrete Sealing

Bare concrete drinks in west-coast rain, then freeze-thaw cycles and salt pry it apart from the inside. A professionally applied penetrating sealer stops that cycle before it starts — without changing the natural look of the surface.

  • Deep-clean and surface preparation first, always
  • Penetrating or wet-look sealers — your choice of finish
  • Driveways, patios, walkways and exposed aggregate
  • Protection against moisture, salt, stains and freeze-thaw
Get a Free Assessment
Freshly sealed concrete driveway in front of a craftsman home

Concrete seal & exposed-aggregate apron — Greater Victoria

Asphalt Sealcoating

UV and rain bleach asphalt grey and open its pores; water gets in, winter does the rest. Sealcoating restores the deep black finish and puts a sacrificial barrier between your driveway and the weather.

  • Pressure wash and edge preparation included
  • Cracks hot-filled before any coating goes down
  • Commercial-grade sealer, squeegee and brush applied
  • Recommended every 2–3 years on the Island
Get a Free Assessment
Freshly sealcoated asphalt driveway leading to an estate gate

Freshly sealed to the gate line — see the before/after on Our Work

Epoxy Coatings

A garage floor takes more abuse than any surface in the house. A ground, primed and flake-broadcast epoxy system turns dusty concrete into a sealed industrial finish that shrugs off tires, oil and road salt — and cleans up with a hose.

  • Diamond-grind preparation — never acid-etch shortcuts
  • Moisture-tolerant primers locked into bare concrete
  • Full-flake or solid-colour systems with urethane topcoat
  • Walk-on in 24 hours, park-on in 72
Get a Free Assessment
Finished epoxy flake garage floor with a parked car

Full-flake system — watch it built end-to-end on the Process page

Power Washing

Moss, algae and ground-in grime aren’t just ugly — they hold moisture against the surface year-round. Commercial-pressure washing strips it back to clean material without scarring, and preps the surface for sealing.

  • Surface-appropriate pressure and detergents
  • Driveways, patios, pavers, walkways and steps
  • Polymeric sand re-set available for pavers
  • The mandatory first step before any seal we apply
Get a Free Assessment
Charcoal paver driveway washed and mid-seal showing the wet-look line

Washed, re-sanded and sealed paver drive — mid-application

Crack Repair

Every crack is a drain funnelling water under your surface. Filled and sealed early, it’s a maintenance item; ignored through a winter or two, it becomes replacement work. We repair asphalt and concrete cracking before it spreads.

  • Hot rubberized filler for asphalt movement joints
  • Flexible polyurethane systems for concrete
  • Always paired with drainage-cause assessment
  • Included in every sealcoat we quote
Get a Free Assessment
Close-up of the crisp line where freshly sealed asphalt meets untreated pavement

Sealed edge — the line between protected and exposed asphalt

Not sure which service your surface needs? That’s what the free consult is for.

Book a Free Consultation
Call Book a quote